The easiest way to get started is to download a pre-packaged Mininet/Ubuntu VM. This VM includes Mininet itself, all OpenFlow binaries and tools pre-installed, and tweaks to the kernel configuration to support larger Mininet networks.python
VM installation is the easiest and most foolproof way of installing Mininet, so it’s what we recommend to start with.linux
Follow these steps for a VM install:git
Download the Mininet VM image.github
Download and install a virtualization system. We recommend VirtualBox (free, GPL) because it is free and works on OS X, Windows, and Linux (though it’s slightly slower than VMware in our tests.) You can also use Qemu for any platform, VMware Workstation for Windows or Linux, VMware Fusion for Mac, or KVM (free, GPL) for Linux.ide
Sign up for the mininet-discuss mailing list. This is the source for Mininet support and discussion with the friendly Mininet community. ;-)fetch
Run through the VM Setup Notes to log in to the VM and customize it as desired.ui
Follow the Walkthrough to get familiar with Mininet commands and typical usage.this
(In addition to the above resources, we’ve prepared a helpful Mininet FAQ as well as Documentation which you can refer to at any time!)google
Once you’ve completed the Walkthrough, you should have a clear idea for what Mininet is and what you might use it for. If you are interested in OpenFlow and Software-Defined Networking, you will want to complete the OpenFlow tutorial as well. Good luck, and have fun!idea
This option works well for local VM, remote EC2, and native installation. It assumes the starting point of a fresh Ubuntu (or, experimentally, Fedora) installation. (If you are upgrading from an older Mininet and/or OVS, see notes on removing old versions, below.)
We strongly recommend more recent Ubuntu releases, because they support newer versions of Open vSwitch. (Fedora also supports recent OVS releases)
To install natively from source, first you need to get the source code:
git clone git://github.com/mininet/mininet
Note that the above git command will check out the latest and greatest Mininet (which we recommend!) If you want to run the last tagged/released version of Mininet - or any other version - you may check that version out explicitly:
cd mininet git tag # list available versions git checkout -b 2.2.1 2.2.1 # or whatever version you wish to install cd ..
Once you have the source tree, the command to install Mininet is:
mininet/util/install.sh [options]
Typical install.sh options include:
-a: install everything that is included in the Mininet VM, including dependencies like Open vSwitch as well the additions like the OpenFlow wireshark dissector and POX. By default these tools will be built in directories created in your home directory. -nfv: install Mininet, the OpenFlow reference switch, and Open vSwitch -s mydir: use this option before other options to place source/build trees in a specified directory rather than in your home directory.So, you will probably wish to use one (and only one) of the following commands:
To install everything (using your home directory): install.sh -a To install everything (using another directory for build): install.sh -s mydir -a To install Mininet + user switch + OVS (using your home dir): install.sh -nfv To install Mininet + user switch + OVS (using another dir:) install.sh -s mydir -nfv
You can find out about other useful options (e.g. installing the OpenFlow wireshark dissector, if it’s not already included in your version of wireshark) using
install.sh -h
After the installation has completed, test the basic Mininet functionality:
sudo mn --test pingall
Then continue with steps 3-5, above. If you run into errors, first consult the FAQ, Documentation, and mailing list archives to see if anything resembling your problem has been seen before and if there might be a possible solution. If those things don’t help and you still have problems that you cannot solve on your own (or with some help from Google :) ), you can request help on the friendly mininet-discuss mailing list.
If you’re running a recent Ubuntu release, you can install the Mininet packages. Note that this may give you an older version of Mininet, but it can be a very convenient way to get started.
First, if you are upgrading or have upgraded from an earlier installation of Mininet (like 1.0) or a version of Open vSwitch which might have been compiled and stored in /usr/local, make sure you remove any traces of earlier versions of Mininet and Open vSwitch from /usr/local/:
sudo rm -rf /usr/local/bin/mn /usr/local/bin/mnexec \
/usr/local/lib/python*/*/*mininet* \
/usr/local/bin/ovs-* /usr/local/sbin/ovs-*
Then, to confirm which OS version you are running, run the command
lsb_release -a
Next, install the base Mininet package by entering only one of the following commands, corresponding to the distribution you are running:
Mininet 2.1.0 on Ubuntu 14.10: sudo apt-get install mininet Mininet 2.1.0 on Ubuntu 14.04: sudo apt-get install mininet Mininet 2.0.0 on Ubuntu 12.04: sudo apt-get install mininet/precise-backports
After this completes, you should deactivate openvswitch-controller if it is installed and/or running:
sudo service openvswitch-controller stop sudo update-rc.d openvswitch-controller disable
Then you can test Mininet:
sudo mn --test pingall
If Mininet complains that Open vSwitch isn’t working, you may need to rebuild its kernel module:
sudo dpkg-reconfigure openvswitch-datapath-dkms sudo service openflow-switch restart
If you wish to go through the Mininet walkthrough, you will want to install additional software. The following commands
git clone git://github.com/mininet/mininet mininet/util/install.sh -fw
will install the OpenFlow reference switch, reference controller and Wireshark dissector.
There are many ways to do this. If you haven’t made any changes to Mininet, you can usually
cd mininet git fetch git checkout master # Or a specific version like 2.2.1 git pull sudo make install
As an alternative to sudo make install you can also do sudo make develop, which will create symbolic links from /usr/python/... to your source tree.
Note that this will only upgrade Mininet itself - any other components such as Open vSwitch, etc. can be upgraded separately as desired.