說明：工作中有時候需要把數據庫中的表導出到PowerDesigner以方便查看。
一：下載MySQL ODBC
二：配置ODBC數據源
三：PowerDesigner連接數據庫
四：PowerDesigner導出數據
五：修改name字段的顯示信息爲comment
六：PowerDesigner導出Excel
七：PowerDesigner取消name字段關聯code
1.1到MySQL官網下載MySQL ODBC http://dev.mysql.com/downloads/connector/odbc/5.1.html
2.1打開「控制面板」下的「管理工具」
2.2配置ODBC數據源
3.1PowerDesigner創建Physical Data Model
3.2連接數據庫
解決方法：同時安裝32位和64位的ODBC（win7 64系統）
4.1導出數據表
5.1 PowerDesigner->Tools->Execute Commands->Edit/Run Scripts
Option Explicit ValidationMode = True InteractiveMode = im_Batch Dim mdl ' the current model ' get the current active model Set mdl = ActiveModel If (mdl Is Nothing) Then MsgBox "There is no current Model " ElseIf Not mdl.IsKindOf(PdPDM.cls_Model) Then MsgBox "The current model is not an Physical Data model. " Else ProcessFolder mdl End If Private sub ProcessFolder(folder) On Error Resume Next Dim Tab 'running table for each Tab in folder.tables if not tab.isShortcut then tab.name = tab.comment Dim col ' running column for each col in tab.columns if col.comment="" then else col.name= col.comment end if next end if next Dim view 'running view for each view in folder.Views if not view.isShortcut then view.name = view.comment end if next ' go into the sub-packages Dim f ' running folder For Each f In folder.Packages if not f.IsShortcut then ProcessFolder f end if Next end sub
6.1以下內容來自於http://blog.zzstudio.net/appsoft/article_707.html
6.2打開powerdesigner，在視圖界面按ctrl+shift+x快捷鍵，執行以下腳本即可（Office Excel）
Option Explicit
Dim rowsNum
rowsNum = 0
'-----------------------------------------------------------------------------
' Main function
'-----------------------------------------------------------------------------
' Get the current active model
Dim Model
Set Model = ActiveModel
If (Model Is Nothing) Or (Not Model.IsKindOf(PdPDM.cls_Model)) Then
MsgBox "The current model is not an PDM model."
Else
' Get the tables collection
'創建EXCEL APP
dim beginrow
DIM EXCEL, SHEET
set EXCEL = CREATEOBJECT("Excel.Application")
EXCEL.workbooks.add(-4167)'添加工作表
EXCEL.workbooks(1).sheets(1).name ="test"
set sheet = EXCEL.workbooks(1).sheets("test")
ShowProperties Model, SHEET
EXCEL.visible = true
'設置列寬和自動換行
sheet.Columns(1).ColumnWidth = 20
sheet.Columns(2).ColumnWidth = 40
sheet.Columns(4).ColumnWidth = 20
sheet.Columns(5).ColumnWidth = 20
sheet.Columns(6).ColumnWidth = 15
sheet.Columns(1).WrapText =true
sheet.Columns(2).WrapText =true
sheet.Columns(4).WrapText =true
End If
'-----------------------------------------------------------------------------
' Show properties of tables
'-----------------------------------------------------------------------------
Sub ShowProperties(mdl, sheet)
' Show tables of the current model/package
rowsNum=0
beginrow = rowsNum+1
' For each table
output "begin"
Dim tab
For Each tab In mdl.tables
ShowTable tab,sheet
Next
if mdl.tables.count > 0 then
sheet.Range("A" & beginrow + 1 & ":A" & rowsNum).Rows.Group
end if
output "end"
End Sub
'-----------------------------------------------------------------------------
' Show table properties
'-----------------------------------------------------------------------------
Sub ShowTable(tab, sheet)
If IsObject(tab) Then
Dim rangFlag
rowsNum = rowsNum + 1
' Show properties
Output "================================"
sheet.cells(rowsNum, 1) = "實體名"
sheet.cells(rowsNum, 2) =tab.name
sheet.cells(rowsNum, 3) = ""
sheet.cells(rowsNum, 4) = "表名"
sheet.cells(rowsNum, 5) = tab.code
sheet.Range(sheet.cells(rowsNum, 5),sheet.cells(rowsNum, 6)).Merge
rowsNum = rowsNum + 1
sheet.cells(rowsNum, 1) = "屬性名"
sheet.cells(rowsNum, 2) = "說明"
sheet.cells(rowsNum, 3) = ""
sheet.cells(rowsNum, 4) = "字段中文名"
sheet.cells(rowsNum, 5) = "字段名"
sheet.cells(rowsNum, 6) = "字段類型"
'設置邊框
sheet.Range(sheet.cells(rowsNum-1, 1),sheet.cells(rowsNum, 2)).Borders.LineStyle = "1"
sheet.Range(sheet.cells(rowsNum-1, 4),sheet.cells(rowsNum, 6)).Borders.LineStyle = "1"
Dim col ' running column
Dim colsNum
colsNum = 0
for each col in tab.columns
rowsNum = rowsNum + 1
colsNum = colsNum + 1
sheet.cells(rowsNum, 1) = col.name
sheet.cells(rowsNum, 2) = col.comment
sheet.cells(rowsNum, 3) = ""
sheet.cells(rowsNum, 4) = col.name
sheet.cells(rowsNum, 5) = col.code
sheet.cells(rowsNum, 6) = col.datatype
next
sheet.Range(sheet.cells(rowsNum-colsNum+1,1),sheet.cells(rowsNum,2)).Borders.LineStyle = "2"
sheet.Range(sheet.cells(rowsNum-colsNum+1,4),sheet.cells(rowsNum,6)).Borders.LineStyle = "2"
rowsNum = rowsNum + 1
Output "FullDescription: " + tab.Name
End If
End Sub
6.3打開powerdesigner，在視圖界面按ctrl+shift+x快捷鍵，執行以下腳本即可（WPS Excel）
set EXCEL = CREATEOBJECT("Excel.Application")
替換爲
set EXCEL = CREATEOBJECT("ket.Application")
7.1選擇Tools->GeneralOptions...菜單，出現General Options對話框
